|
I have loaded many bikes in the back of my truck (slightly lifted F250). I put my ramp up and put a step on one side. Just go nice and slow and you'll be fine. When you tie it down, don't do anything difficult or tricky. Just tie to the lower tripple clamps (right to right, left to left) and add a little pressure. If you crank them down for all your worth, you most likely will be replacing fork seals real soon. On my dirtbikes I use a fork saver, goes in between the tire and triple clamp and stops the forks from bottoming. DO NOT RIDE YOUR BIKE UP THE RAMP! It is unsafe and stupid.
|