assembly question

[whootmon]

Hello to all and thanks in advance. my son wrecked his 2005 fz6 and iam in the process of putting it back together with all new abs. My problem is i cant find a picture or part number for the screw ,bolt or what ever it is that connects the windsheild to the front fairing where it curves under in the very front. It sort of looks like hawks beak

[reiobard]

Ronayers.com Fiche Desktop Motorcycle Yamaha 2005 FZ6STC FZ6 COWLING 1

is it on this list? Don't be aftraid to use the + to zoom in a bit.

[Rushiku]

It is the same as the screws used in the other 4 holes on the fairing, P/N: 90150-05023-00

Go here: PowerSportsPro | Honda OEM Parts | Kawasaki OEM Parts | Suzuki OEM Parts | Yamaha OEM Parts, select your bike, go to Cowling 1, it is part 3.

edit: the link in the previous post goes right to the parts diagram, still part 3.

[whootmon]

Iam sorry but it isnt the same as part number 3 i ordered some of those for the new windsheld. The part iam looking for has to have male and female ends as there is no place to just screw a screw into its hollow space above the hole in cowling and windsheld.

[reiobard]

Originally Posted by whootmon

Iam sorry but it isnt the same as part number 3 i ordered some of those for the new windsheld. The part iam looking for has to have male and female ends as there is no place to just screw a screw into its hollow space above the hole in cowling and windsheld.

Is there a chance that it is a #26 into a #8

[whootmon]

It could be iam afirefighter and iam at work (24 hours in a row ) so i cant look at it until tomorrow ill check it then. I really dont think that will be the right parts but you could very well be right thank you all for quick and helpful responce.

[Raid The Revenge]

Here's what you do:

Go into a motorcycle shop and buy a WINDSCREEN SCREW kit. You'll get new colors, stronger screws with rubber bungs to connect everything.

$20. Trust me, it's worth it. Those stock screws on the windscreen are crappy plastic, you want anodized metal with different colors!!

[Rushiku]

Originally Posted by whootmon

I am sorry but...

I have a 2005 and have taken off the windshield - I am quite sure that the #3 screw is the one you need - though it sounds like you also need a #4 to screw it into.

If you go to the link I provided, you'll note that the part count on #3 and #4 is 5 - two of each on both sides by the mirrors, and one each under the nose.

Elm - maybe the newer bikes use plastic, but the 2005 has metal screws, not that anodized screws aren't cool...no one would ever see them. (under mirror boots and under the nose - out of sight)

[willoby61726]

i have an 04 and mine are the crappy plastic so the 05 should be the same unless someone has already repalced them with metal ones

[Rushiku]

Originally Posted by willoby61726

i have an 04 and mine are the crappy plastic so the 05 should be the same unless someone has already repalced them with metal ones

Hadn't considered that...mine are 3mm hex head, black aluminum (I think, they're definitely soft and definitely metal - nearly stripped the one whootmon is asking about due to not having metric keys the first time I tried to remove them )