 |
|
07-13-2008, 06:30 PM
|
#1 (permalink) |
|
2004 Yamaha FZ6
Join Date: Feb 2008
Location: Iowa
Bike: 2004 Yamaha FZ6
Posts: 354
 |
Yamaha R1 Flush Signals Question??
Does anybody know if the Yamaha R1 Flush signals are wired differently than on the FZ6's? I read the "unofficial compatibility chart" for our bikes and it said R1 flush signals would work...........after I installed the signals only 4 of the LEDs illuminate (as running lights) and the same 4 signals blink for turning/signaling. There are only 2 wires, so there should be no running light ability..........do I need to re-wire the signals? Why are only 4 lighting up?
Thank You, Nick 
__________________
HealTech Speedo Healer V4, Scorpion Exhaust, Yamaha R1 Flush Signals, Clear Alternatives Smoke Integrated Tail, Motovation Frame Sliders, Smoke Puig Racing Screen, BD43 Dual Headlight Mod, FAZR6 Fender Eliminator, Michelin Pilot Power 2CTs |
|
    
|
|
07-13-2008, 09:09 PM
|
#2 (permalink) |
|
NOT BANNED
 
Join Date: May 2007
Location: EARTH
Bike: 2007 Yamaha YZFR1
Posts: 2,631
 |
Re: Yamaha R1 Flush Signals Question??
just a thought but are you sure your using the ground wire not blinker and marker.
__________________
a work in progress... |
|
|
|
| The Following User Says Thank You to sportrider For This Useful Post: | nlheikki (07-14-2008) |
|
07-14-2008, 05:47 AM
|
#3 (permalink) |
|
2004 Yamaha FZ6
Join Date: Feb 2008
Location: Iowa
Bike: 2004 Yamaha FZ6
Posts: 354
|
Re: Yamaha R1 Flush Signals Question??
That was my thought too. The blinkers came pre-wired with the yamaha connectors, so I think I'll have to double check to see if the ground and blinker are wired.
Thanks
__________________
HealTech Speedo Healer V4, Scorpion Exhaust, Yamaha R1 Flush Signals, Clear Alternatives Smoke Integrated Tail, Motovation Frame Sliders, Smoke Puig Racing Screen, BD43 Dual Headlight Mod, FAZR6 Fender Eliminator, Michelin Pilot Power 2CTs |
|
|
|
|
07-14-2008, 03:28 PM
|
#4 (permalink) |
|
2004 Yamaha FZ6
Join Date: Feb 2008
Location: Iowa
Bike: 2004 Yamaha FZ6
Posts: 354
|
Re: Yamaha R1 Flush Signals Question??
Anybody else out there come across this before?
__________________
HealTech Speedo Healer V4, Scorpion Exhaust, Yamaha R1 Flush Signals, Clear Alternatives Smoke Integrated Tail, Motovation Frame Sliders, Smoke Puig Racing Screen, BD43 Dual Headlight Mod, FAZR6 Fender Eliminator, Michelin Pilot Power 2CTs |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| So many mods so little a time! LED flush mount signals, Tail light, Fender Eliminator | krid80 | FZ6 Mods | 17 | 06-27-2008 08:54 AM |
| Flush Mounts on fairing of 07 FZ6? | AJ Babaganoosh | FZ6 Mods | 5 | 03-20-2008 06:26 AM |
| I got my Flush Mounts installed!!! | sportrider | FZ6 Mods | 37 | 03-04-2008 08:46 PM |
| Non L.E.D Flush mounts? | bmccrary | FZ6 Mods | 15 | 02-25-2008 12:51 PM |
| Flush mounts ordered!!! | sportrider | FZ6 Mods | 7 | 12-04-2007 08:44 PM |
All times are GMT -7. The time now is 03:13 PM.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
