|
|
#1 (permalink) |
|
Junior Member
Join Date: Jul 2008
Location: mpls
Bike: yamahafz6
Posts: 9
|
fz6 stalling
Hi Im new to this thing here . Just brought a new fz6 in march Im having a lot of problems with it and of course the dealership won't help. My chaine came losse by itself ? My bigger problem is the stalling all the time why anyone can't help?
Thank you Patrick |
|
|
|
|
|
#2 (permalink) |
|
Goodfella
Join Date: Nov 2007
Location: Windsor , ON
Bike: 2007 FZ6
Posts: 467
|
Re: fz6 stalling
hi and welcome!
what is your idle rpm? is it at factory recommended specifics? 1250-1400 rpm? when does it stall? by itself,,or when you try to take off or while clutching in when you are on the go?
__________________
07 FZ6 S2 Candy Apple Red |
|
|
|
|
|
#4 (permalink) |
|
LLOYD CHRISTMAS
Join Date: Jun 2008
Location: Just Right of St. Louis
Bike: 07 fz6
Posts: 617
|
Re: fz6 stalling
Try to release the clutch super super slow giving it no gas. It should start rolling on be on your way. If you do this enough, you can find the friction point and start giving it some gas. When you find that "sweet spot" You will be good to go.
__________________
Nick 07 Sexy Red FZ6 01 ZX6R (sold) 85 Honda V30 Magna (sold) Mods: 15t Front Sprocket New Tip Scorpions Radiator Covers Black Racetech .95 springs and 15wt oil Member # 3 thousand two hundred five |
|
|
|
|
|
#8 (permalink) |
|
Junior Member
Join Date: Jul 2008
Location: mpls
Bike: yamahafz6
Posts: 9
|
Re: fz6 stalling
I have friends driving the fz and it happen to them too. The fz just stop and you have to sart the thing again . The dealership told me everything is fine but why I don't get it and it's getting worst . Please any sugestions cause I really like the fz.
|
|
|
|
|
|
#9 (permalink) |
|
Tiger Trainer
Join Date: May 2008
Location: Flagstaff, AZ
Bike: Wrecked my 08 Raven :(
Posts: 193
|
Re: fz6 stalling
You might have to adjust your idling speed. Crank it up a little so the RPMs never go too low and stall the bike. There is a screw on the left side of the bike that you can get to with a screwdriver. I can't remember exactly where it is, I'm sure someone will chime in.
|
|
|
|
| The Following User Says Thank You to Cloned For This Useful Post: | patrick a (07-30-2008) |
|
|
#10 (permalink) |
|
UK Moderator
|
Re: fz6 stalling
If your bike is older than 2005 TPS should not be a problem. adjust your idle speed once the engine is warm. It worked for me.
Nelly
__________________
"Some say......... His cardiac output is equal to the FZ6's 4 cylinders at 13,000rpm. All we know is he's called the STIG".:UK:Mods: K&N Airfilter, Datatool system 6 alarm, Bikerdude headlight harness, 12V power socket, Data tag, 15T Front sprocket, Speedo healer, Puig frame slders, front & back Crash bobbin axel sliders. "Dont ask me I got it from here"? Forum FAQs... My Resume... |
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|