|
|
#1 (permalink) |
|
Moderator
Join Date: Apr 2008
Location: Australia
Bike: 2006 fzn
Posts: 2,458
|
Rear Shock alternatives?
Hey everyone, am in the process of giving my 06 FZ6 front suspension a big facelift with racetech springs, and emulators, and when i have finished this, i am going to turn my attention to the rear shock.
Have a a bit of a look on the net, and there are a few alternatives. Just wanting to get some idea's from other FZ6 riders, as to what they have replaced their rear shock with, and what the results have been, or what is on everyone's wishlist in regards to rear shocks. Am looking for relative ease of installtion, and possibly, some adjustability, and obviously better performance than OEM. Anyone got any thoughts?
__________________
06 FZ6N - Engine: PCIII (Cust.Map) = 98.4hp.TB Ti's, BMC Air filt., airbox mod, -1 front sprocket, Speedohealer Suspension: 08 fz6 Forks, Racetech .95kg springs, gold valve emulators, Ohlins shock. Brakes: R6 front calipers, Braking Wave Discs, Braided Lines, Ferodo pads. Ergonomics: Pazzo levers, Valtermoto Rearsets, MCS Drag Bars, Oggy Knobs. Bling: MCS Mirrors, Mini LED indicators, MCS Carbon Bar Ends, 08 front fender, Bagster tank bra, Polished Wheels, FE. Scorpion sr900i alarm.
|
|
|
|
|
|
#2 (permalink) |
|
Super Member
Join Date: Jan 2008
Location: Austin, Texas
Bike: 2007 FZ6
Posts: 3,290
|
Re: Rear Shock alternatives?
Hey Wolfman - The rear shock is a difficult one to tweak. Here's a couple of links to get started with.
http://www.fz6-forum.com/forum/how-t...onversion.html http://www.fz6-forum.com/forum/fz6-m...k-install.html (R1 Shock Install) Here's a source for a spring replacement: Hyper Pro USA - World Class Suspension Technology I think the new spring will help a great deal however I'm not sure what you do about the damping? Perhaps the shock can be rebuilt with a heavier oil?
__________________
Pete Mods: Akrapovic, Ohlins Remote, R6 Fork, RyanK Fender Mounts, Cobin with Backrest, Motovation Sliders, Yamaha Cowl, Stickers Removed, Galfers, Pazzo Shorties, Rizoma FE, Fredlight, Hugger Trimmed, ConvertiBar Clip-Ons, Acculign Top Clamp, OSO2K Setbacks, PC III w/ Custom AF1 Racing Map. Up Coming Mods: All Balls Headset
|
|
|
|
| The Following User Says Thank You to Hellgate For This Useful Post: | Wolfman (08-11-2008) |
|
|
#3 (permalink) | |
|
Moderator
Join Date: Apr 2008
Location: Australia
Bike: 2006 fzn
Posts: 2,458
|
Re: Rear Shock alternatives?
Quote:
Thanks for those links. Was guessing it was a relatively tricky mod, as there is not much written about it in this forum... I have been looking at the Hyper Pro page, Have also found some bitubo shock's at Caprimoto that fit too. Has anyone got one of these??? Carpimoto There's also the Uber expensive, but highly desirable Ohlins. Here is the link to what OHLINS have...has anyone got one of these??? Recommendation list Half the fun is looking!
__________________
06 FZ6N - Engine: PCIII (Cust.Map) = 98.4hp.TB Ti's, BMC Air filt., airbox mod, -1 front sprocket, Speedohealer Suspension: 08 fz6 Forks, Racetech .95kg springs, gold valve emulators, Ohlins shock. Brakes: R6 front calipers, Braking Wave Discs, Braided Lines, Ferodo pads. Ergonomics: Pazzo levers, Valtermoto Rearsets, MCS Drag Bars, Oggy Knobs. Bling: MCS Mirrors, Mini LED indicators, MCS Carbon Bar Ends, 08 front fender, Bagster tank bra, Polished Wheels, FE. Scorpion sr900i alarm.
|
|
|
|
|
|
|
#4 (permalink) | |
|
Super Member
Join Date: Jan 2008
Location: Austin, Texas
Bike: 2007 FZ6
Posts: 3,290
|
Re: Rear Shock alternatives?
Quote:
After the R1 disaster the Ohlins was reasonable, especially when I had put a good 5 hours in to the project and had it not work at all.
__________________
Pete Mods: Akrapovic, Ohlins Remote, R6 Fork, RyanK Fender Mounts, Cobin with Backrest, Motovation Sliders, Yamaha Cowl, Stickers Removed, Galfers, Pazzo Shorties, Rizoma FE, Fredlight, Hugger Trimmed, ConvertiBar Clip-Ons, Acculign Top Clamp, OSO2K Setbacks, PC III w/ Custom AF1 Racing Map. Up Coming Mods: All Balls Headset
|
|
|
|
|
| The Following User Says Thank You to Hellgate For This Useful Post: | Wolfman (08-11-2008) |
|
|
#5 (permalink) |
|
Saratogian Moderator
Join Date: Aug 2007
Location: San Francisco, CA
Bike: '04 FZ6N - Silver
Posts: 1,981
|
Re: Rear Shock alternatives?
I've got the HRC and love it. You could get the regular Ohlins shock (pre-load & compression) for a decent price. If I were you, living in Australia and all, I'd figure out what forums all the FZ6 Cup guys hang out on and check the classified section over there. Shouldn't be too hard to find a used one. You can also check eBay for Wilbers, Penske, etc.
Oh by the way, once you get the right shock in the condition you want, it won't take very long to install at all.
__________________
![]() 2004 FZ6N / KTM 125 SX www.youtube.com/DefyInertia "Y'all Be Safe Out There" - KILLBOY My Rider Resume |
|
|
|
| The Following User Says Thank You to DefyInertia For This Useful Post: | Wolfman (08-11-2008) |
|
|
#6 (permalink) | |
|
Moderator
Join Date: Apr 2008
Location: Australia
Bike: 2006 fzn
Posts: 2,458
|
Re: Rear Shock alternatives?
Quote:
3 cheers for Hellgate for putting me onto a great deal! Oh, and re the place where the FZ6 cup boys hang...have been looking for a while now, it does not seem to exist! Have had similar thoughts re parts from these guys, especially rear sets, etc. Love this forum!
__________________
06 FZ6N - Engine: PCIII (Cust.Map) = 98.4hp.TB Ti's, BMC Air filt., airbox mod, -1 front sprocket, Speedohealer Suspension: 08 fz6 Forks, Racetech .95kg springs, gold valve emulators, Ohlins shock. Brakes: R6 front calipers, Braking Wave Discs, Braided Lines, Ferodo pads. Ergonomics: Pazzo levers, Valtermoto Rearsets, MCS Drag Bars, Oggy Knobs. Bling: MCS Mirrors, Mini LED indicators, MCS Carbon Bar Ends, 08 front fender, Bagster tank bra, Polished Wheels, FE. Scorpion sr900i alarm.
|
|
|
|
|
|
|
#7 (permalink) | |
|
Saratogian Moderator
Join Date: Aug 2007
Location: San Francisco, CA
Bike: '04 FZ6N - Silver
Posts: 1,981
|
Re: Rear Shock alternatives?
Quote:
How much did they charge you for shipping? The shock you got is an emulsion type and adjustable for rebound only, right? My remote res HRC was $690 shipped from Hardracing (US to US). There was a guy on SBN that raced an FZ6 in Australia, and won a lot. oso2k bought his Ohlins HRC from the guy ($500 IIRC). Perhaps he knows and oso2k could put you in contact with him....
__________________
![]() 2004 FZ6N / KTM 125 SX www.youtube.com/DefyInertia "Y'all Be Safe Out There" - KILLBOY My Rider Resume |
|
|
|
|
|
|
#8 (permalink) | |
|
Moderator
Join Date: Apr 2008
Location: Australia
Bike: 2006 fzn
Posts: 2,458
|
Re: Rear Shock alternatives?
Quote:
Thanks for the tip re oso2, will PM him, and see where it gets me! Oh and they charged me $89 for shipping ($650 insurance, 7-10 days delivery).
__________________
06 FZ6N - Engine: PCIII (Cust.Map) = 98.4hp.TB Ti's, BMC Air filt., airbox mod, -1 front sprocket, Speedohealer Suspension: 08 fz6 Forks, Racetech .95kg springs, gold valve emulators, Ohlins shock. Brakes: R6 front calipers, Braking Wave Discs, Braided Lines, Ferodo pads. Ergonomics: Pazzo levers, Valtermoto Rearsets, MCS Drag Bars, Oggy Knobs. Bling: MCS Mirrors, Mini LED indicators, MCS Carbon Bar Ends, 08 front fender, Bagster tank bra, Polished Wheels, FE. Scorpion sr900i alarm.
Last edited by Wolfman; 08-11-2008 at 11:27 AM.. Reason: forgot something! |
|
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Adjusting rear shock preload | OneTrack | How To's... | 37 | 12-02-2008 04:04 AM |
| Rear Shock Dumb Question | kustom17 | FZ6 Technical | 4 | 07-17-2008 07:26 PM |
| OEM Rear Shock Length and Eye Diameter | bcityroller | FZ6 Technical | 1 | 11-30-2007 11:41 AM |