Autocom Install - Yamaha FZ6 Forums - International FZ6 Motorcycle Community Forum

Incendo · 08-11-2008, 10:23 AM

I have a 2007 FZ6 and want to hard-wire an Autocom system into the bike. Would really appreciate any advice / instructions from anyone who may have done this before.

Cheers

Jim Karam · 08-11-2008, 11:53 AM

What's your question? Autocom sells a direct wiring option, if your unit didn't already come with one. I wired my Autocom, and a bunch of other electronics, using Powerlet parts Powerlet :: Tank Bag Kits. They work great. I installed everything into a Super-Mini tank bag for convenience... since every cable I got seems to be one meter long, when I really need about six inches. Anyway, ask away with specific questions.

Incendo · 08-11-2008, 12:19 PM

Quote:

Originally Posted by Jim Karam

What's your question? Autocom sells a direct wiring option, if your unit didn't already come with one. I wired my Autocom, and a bunch of other electronics, using Powerlet parts Powerlet :: Tank Bag Kits. They work great. I installed everything into a Super-Mini tank bag for convenience... since every cable I got seems to be one meter long, when I really need about six inches. Anyway, ask away with specific questions.

Sorry, guess I should have been a little more specific. Did you wire your Autocom directly to the bike's system or did you use something like the Centech fuse panel for wiring. I don't really know anything about wiring / electrics so am just looking for some advice on the best (and easiest) way to install the Autocom.

Jim Karam · 08-11-2008, 02:38 PM

As I tried to say before, I used a direct autocom connection to a Powerlet SAE adapter that eventually tied back to a passthru on my tankbag. I'd always make sure there's at least one fuse in the system for any add-on, although one is usually enough.

Quote:

Originally Posted by Incendo

Sorry, guess I should have been a little more specific. Did you wire your Autocom directly to the bike's system or did you use something like the Centech fuse panel for wiring. I don't really know anything about wiring / electrics so am just looking for some advice on the best (and easiest) way to install the Autocom.

Incendo · 08-12-2008, 10:23 AM

Thanks Jim, we'll try hooking it up and hopefully we won't make a hash of it.

Cheers

08-11-2008, 10:23 AM	#1 (permalink)
Incendo Junior Member Join Date: Aug 2008 Location: Vancouver Bike: FZ6 Posts: 3 Rep Power: 0 Member #4212	Autocom Install I have a 2007 FZ6 and want to hard-wire an Autocom system into the bike. Would really appreciate any advice / instructions from anyone who may have done this before. Cheers

08-12-2008, 10:23 AM	#5 (permalink)
Incendo Junior Member Join Date: Aug 2008 Location: Vancouver Bike: FZ6 Posts: 3 Rep Power: 0 Member #4212	Re: Autocom Install Thanks Jim, we'll try hooking it up and hopefully we won't make a hash of it. Cheers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help for HID install?	GConn	FZ6 Mods	13	Today 12:11 PM
ConvertiBar Install	Hellgate	FZ6 Mods	21	11-22-2008 11:26 AM
ThrottleMeister Install	Thbrtmn	Main Lobby / New Member Section	19	11-10-2008 11:28 AM
FZ1 Handle bar install	Howattzer	FZ6 Mods	32	07-31-2008 01:41 PM
Autocom and New Nokia's	xeres	FZ6 General Discussion	1	04-21-2008 09:02 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Advertisement