 |
|
08-11-2008, 05:20 PM
|
#1 (permalink) |
|
Senior Member
Join Date: May 2008
Location: Huntsville Texas
Bike: 2008 FZ6 Black
Posts: 144
 |
best aftermarket bars?
in everyones opinion which after market handlebars are the best bet for the FZ6? im looking for a straight/straighter style bar that i wont have to worry about the tank getting dinged up...ive seen FZ1 bars on FZ6's around the forum, but it seems that equipment i dont have may be required in event of a screw up. let me know what you think!
|
|
    
|
|
08-11-2008, 11:47 PM
|
#3 (permalink) |
|
Throttle Jockey!!!!
Join Date: Jun 2008
Location: Bristol Ct
Bike: 2008 FZ6
Posts: 22
 |
Re: best aftermarket bars?
I actually have a set of the Carmichael bend Pro taper motocross bars.... they have a bend somewhere in the middle of the fz6/fz1.... I would post pics but I dont have a camera :-( let me see what I can do to scrounge one up and get some pics....
__________________
2008 FZ6 two brothers exhaust w/undertail kit Power Commander III K&N air filter Flat black diamond coat pegs and Inserts Scorpio Alarm Orbital Clear Tank guard LOOKING FOR A REAR SEAT COWL!!! any help? www.quickfz.wordpress.com 
|
|
|
|
|
08-12-2008, 01:29 AM
|
#4 (permalink) |
|
Senior Member
 
Join Date: Feb 2008
Location: West London
Bike: 2007 FZ6-S2
Posts: 1,044
 |
Re: best aftermarket bars?
Renthal makes good bars.
__________________
David '07 FZ6 Fazer S2 in stealth Black, CAT1/2 alarm, stainless Scorpion cans, Puig dark smoke screen, bd43's dual headlight mod complete with uprated Xenon bulbs, Yamaha (GIVI) 45L detachable rear 'courier' box, frame sliders, center stand removal, red reflective rim tape, Reiobard's swing-arm stickers, Conti RoadAttack tires, full sticker removal  
|
|
|
|
|
09-03-2008, 11:42 AM
|
#7 (permalink) |
|
Junior Member
Join Date: Jan 2008
Location: Omaha
Bike: '08 FZ6
Posts: 72
|
Re: best aftermarket bars?
Kind of a dick move from someone with 8 posts
 I had a set of those cheap bikemaster bars on my old bike and they got the job done, plus they have a bunch of different bends. I think I still have a set of the superbike bend laying around that I could test fit Last edited by chemicalsmile; 09-03-2008 at 11:46 AM.. |
|
|
|
| The Following 8 Users Say Thank You to chemicalsmile For This Useful Post: | Boneman (09-04-2008), corekneelius (09-04-2008), fz6nick (09-19-2008), jsw4178 (09-14-2008), KindredGhost (09-03-2008), n1one (09-04-2008), OneTrack (09-14-2008), Ozfazer6 (09-14-2008) |
|
09-03-2008, 12:19 PM
|
#8 (permalink) |
|
Senior Member
Join Date: Jul 2008
Location: Washington
Bike: 06 FZ6N
Posts: 208
|
Re: best aftermarket bars?
There are alot of available ones out there, im highly considering these ones
LSL Handle Bars for the price and quality these are a good choice.
__________________
MODS: SCORPION EXHAUST, LED FLUSHMOUNTS, FENDER ELIMINATOR, SHOGUN FRAME SLIDERS, RED LED UNDERLIGHTS, CLEAR ALTERNATIVES TAILIGHT W/ BUILT IN TURN SIGNALS, HARRIS FZ6 GRIPS, BAR END MIRRORS, DUALSPORT HANDLE BARS, PROJECTOR HEADLIGHT FAIRING |
|
|
|
|
09-04-2008, 05:40 AM
|
#9 (permalink) |
|
Member
Join Date: Aug 2008
Location: Waterloo, Ontario
Bike: FZ6
Posts: 54
|
Re: best aftermarket bars?
I'll post a pic of the bars I put on my 05 FZ6 (tonight). They are perfect...I didn't like the bend in the stock ones. I think I only paid $35.00 CDN for them too so you don't have to spend alot of money.
__________________
I'm going to live forever; so far so good |
|
|
|
|
09-04-2008, 06:11 AM
|
#10 (permalink) |
|
International Noodler
Join Date: May 2008
Location: York, UK
Bike: FZ6N
Posts: 9
|
Re: best aftermarket bars?
I used to have drag bars on. About 5mm of clearance to the tank on full lock. A little wider than the stock bars, a little further forward. Couldn't fit my Yamaha screen with them though. They lasted until I fell off (in a ford of all places) and bent them. Got MT-03 bars on now. Check out the thread in this forum somewhere.
http://www.fz6-forum.com/forum/fz6-m...bars-fz6n.html (MT-03 bars on FZ6N)
__________________
"A reasonable man adapts himself to his environment. An unreasonable man persists in attempting to adapt his environment to suit himself. Therefore, all progress depends on the unreasonable man." |
|
|
|
| The Following User Says Thank You to n0ct0 For This Useful Post: | corekneelius (09-04-2008) |
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FZ1 bars | GConn | FZ6 Mods | 0 | 06-02-2008 02:26 PM |
| Handle Bars | Tallfry | FZ6 Mods | 7 | 06-01-2008 04:19 PM |
| Crash Bars | clunk | FZ6 Mods | 8 | 12-27-2007 10:33 AM |
| Handel Bars | opds9091 | FZ6 Mods | 8 | 11-01-2007 04:18 PM |
| Still can't decide what to do about bars. | youngGun | FZ6 General Discussion | 16 | 10-17-2007 10:28 AM |
All times are GMT -7. The time now is 02:49 PM.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
