 |
|
08-19-2008, 04:32 PM
|
#1 (permalink) |
|
Bartender/Moderator
 
Join Date: May 2007
Location: Glammis, ON, Canada
Bike: 2006 Hayabusa
Posts: 754
  |
Question about Frame Slider compatability.
Will the frame sliders for a generation 2 FZ1 fit/direct bolt on to my 2005 FZ6? If not can someone tell me the diameter, pitch, and length of the motor mount bolt that gets removed so I can get sliders custom machined.
__________________
~Steph Well, remember what you said, because in a day or two, I'll have a witty and blistering retort! You'll be devastated THEN! Calvin and Hobbes |
|
    
|
|
08-26-2008, 02:04 PM
|
#2 (permalink) |
|
Bartender/Moderator
Join Date: May 2007
Location: Glammis, ON, Canada
Bike: 2006 Hayabusa
Posts: 754
|
Re: Question about Frame Slider compatability.
Bump! I want to make sure I am getting the right thing. I have to confirm tonight.
__________________
~Steph Well, remember what you said, because in a day or two, I'll have a witty and blistering retort! You'll be devastated THEN! Calvin and Hobbes |
|
|
|
|
08-26-2008, 02:38 PM
|
#3 (permalink) |
|
Member
Join Date: Nov 2007
Location: Baden, Ontario
Bike: '07 FZ6, '08 Bandit 1250, '08 V-Strom 650
Posts: 520
 |
Re: Question about Frame Slider compatability.
I'm confused, why don't you just buy sliders meant to work with the FZ6 specifically? This way there is no guessing...
__________________
'08 Bandit 1250sea (gray with hard bags and full fairing) '08 V-Strom 650 (blue) '07 FZ6 (Blue) |
|
|
|
|
08-26-2008, 02:57 PM
|
#4 (permalink) |
|
Junior Member
Join Date: May 2008
Location: Austin, TX
Bike: '07 FZ6
Posts: 189
|
Re: Question about Frame Slider compatability.
Sounds like she is having some custom sliders made.
But it also sounds like she is too lazy to take the bolt to a hardware store and find out the specs herself and has been for the past week. 
|
|
|
|
|
08-26-2008, 03:05 PM
|
#5 (permalink) |
|
Bartender/Moderator
Join Date: May 2007
Location: Glammis, ON, Canada
Bike: 2006 Hayabusa
Posts: 754
|
Re: Question about Frame Slider compatability.
Actually when no one answered my question, I went out and measured myself. Just figured if someone had already done it....but whatever, thanks for the help.
And yes, I am getting custom sliders. 
__________________
~Steph Well, remember what you said, because in a day or two, I'll have a witty and blistering retort! You'll be devastated THEN! Calvin and Hobbes |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Frame slider Quest Completed!! | Raid The Revenge | FZ6 General Discussion | 5 | 08-07-2008 03:07 PM |
| frame slider problem | fz6nick | FZ6 General Discussion | 7 | 06-11-2008 02:52 PM |
| Another frame slider question... | Trouble | FZ6 Mods | 24 | 05-08-2008 04:39 PM |
| Frame Slider Torque Spec | JohnTex | FZ6 Technical | 8 | 04-29-2008 09:38 AM |
| Frame slider question.... | Botch | FZ6 General Discussion | 4 | 07-16-2007 12:30 PM |
All times are GMT -7. The time now is 11:30 PM.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
